| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
109.1 MILLIMETERS MINIMUM AND 110.3 MILLIMETERS MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.120 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
69.2 MILLIMETERS MINIMUM AND 70.8 MILLIMETERS MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
69.2 MILLIMETERS MINIMUM AND 70.8 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
91.2 MILLIMETERS MINIMUM AND 92.8 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
12.0 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
11.7 MILLIMETERS MINIMUM AND 12.3 MILLIMETERS MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
45.7 MILLIMETERS MINIMUM AND 46.3 MILLIMETERS MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
116.0 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
EXTENDED FLAT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
6.2 MILLIMETERS MINIMUM AND 6.8 MILLIMETERS MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
69.2 MILLIMETERS MINIMUM AND 70.8 MILLIMETERS MAXIMUM |
| FEAT |
SPECIAL FEATURES |
CENTER SECTION ACCOMMODATES A 53.8MM DIA. CUTOUT AND FOUR 5.5MM DIA. MOUNTING HOLES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
