| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
64.0 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.164 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
67.0 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
5.0 RADIANS MINIMUM AND 7.0 RADIANS MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
20.8 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
9.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
25.4 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.4 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.164 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
67.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
55.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
32.5 MILLIMETERS MINIMUM AND 34.5 MILLIMETERS MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
14.3 MILLIMETERS MINIMUM AND 16.3 MILLIMETERS MAXIMUM |
| CSSR |
SECOND LEG ANGLE |
5.0 RADIANS MINIMUM AND 7.0 RADIANS MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
59.0 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
9.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.164 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
67.0 MILLIMETERS NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
