| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.030 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.060 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.141 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
