| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.120 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.600 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.680 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
60.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
4.620 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.130 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H3-2 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHLH |
SECOND LEG END WIDTH |
4.620 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.163 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.130 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1 HOLE BOTH LEGS 0.360 IN. DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
