| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.060 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.840 INCHES MINIMUM AND 1.880 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.440 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWMX |
FIRST LEG CUTOUT LENGTH |
0.030 INCHES NOMINAL |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
0.440 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.680 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.440 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.120 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.120 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DWG NAME-SUPPORT, SHIELD, FIRE EXTINGUISHER HANDLE BEND RELIEF REQUIRED IN 2 PLACES- 1ST AND 2ND LEG MIDDLE SECTION HAS AN APERTURE, 1.38 IN WIDE ALONG LENGTH BY 1.12 IN LONG, ALONG WIDTH COLOR WHITE |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-529 FED SPEC 1ST TREATMENT RESPONSE AND TT-P-659 FED SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ENAMEL SEMIGLOSS OR PRIMER |
