| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.080 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.690 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.080 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
1.050 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.600 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.687 INCHES NOMINAL |
| AHRD |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
1.060 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.700 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.550 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.690 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.430 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHPW |
FIRST LEG THICKNESS |
0.080 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH LEGS |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.430 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.080 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2 NUT PLATES MS 21075L08N RIVETED TO EA LEG |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8626 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
