| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
57.0 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
3.17 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
151.0 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
107.0 DEGREES MINIMUM AND 108.0 DEGREES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
8.0 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
36.5 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
33.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
3.17 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
73.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
38.5 MILLIMETERS NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
29.0 MILLIMETERS NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
6.0 MAJOR INCHES |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE 1008 TO 1022 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERBORED |
| CSSR |
SECOND LEG ANGLE |
107.0 DEGREES MINIMUM AND 108.0 DEGREES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
8.0 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
38.5 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
3.17 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
73.0 MAJOR INCHES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
