| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.213 NOMINAL MILS AND 0.224 NOMINAL CENTIMETERS |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| MATT |
MATERIAL |
NICKEL ALLOY 625 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.480 NOMINAL MILS AND 0.520 NOMINAL CENTIMETERS |
| CSSR |
SECOND LEG ANGLE |
49.0 DEGREES MINIMUM AND 51.0 DEGREES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 NOMINAL MILS AND 0.102 NOMINAL CENTIMETERS |
