| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.440 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
3.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.188 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.306 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.800 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.532 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.12 RADIANS NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
3.125 NOMINAL INCHES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.800 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.800 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL--C-5541,CL3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
