| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
6.7500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.1900 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.2500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.5600 RADIANS NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
1.7500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.1200 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.5900 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1900 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.2500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.7500 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
1.5000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.6200 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.4060 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
0.5600 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.7500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.1900 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
