| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
146.5 MILLIMETERS MINIMUM AND 149.5 MILLIMETERS MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
20.2 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
46.6 MILLIMETERS MINIMUM AND 48.6 MILLIMETERS MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
44.7 MILLIMETERS NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
47.4 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
29.3 MILLIMETERS NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
22.5 MILLIMETERS MINIMUM AND 25.5 MILLIMETERS MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHQV |
FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
89.4 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
29.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
13.4 MILLIMETERS MINIMUM AND 14.4 MILLIMETERS MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
146.5 MILLIMETERS MINIMUM AND 149.5 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
103.5 MILLIMETERS MINIMUM AND 106.5 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-829 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-514 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
103.5 MILLIMETERS MINIMUM AND 106.5 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
13.4 MILLIMETERS MINIMUM AND 14.4 MILLIMETERS MAXIMUM |
| FEAT |
SPECIAL FEATURES |
THER ARE TWO HOLES WITH DIA. OF 25.9 MM MIN AND 26.3 MM MAX. THERE IS ONE HOLE ITH A DIA. OF 26.7 MM MIN. AND 27.1 MM MAX. |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
