| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F100PW100/200 ENGINE |
| AHQB |
CENTER SECTION THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.158 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLL |
FIRST LEG SLOT LENGTH |
0.485 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| MATT |
MATERIAL |
NICKEL ALLOY |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.063 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| ADLL |
SECOND LEG LENGTH |
0.883 INCHES MINIMUM AND 0.888 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
