| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
MRAP - RG-33 |
| AHPZ |
CENTER SECTION HEIGHT |
3.100 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.120 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.750 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
115.0 DEGREES MINIMUM AND 125.0 DEGREES MAXIMUM |
| CWPD |
FIRST LEG CHAMFER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
2.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.370 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.250 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
2.120 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A829 4130 THRU 4140 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-18729 4130 MIL SPEC SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
115.0 DEGREES MINIMUM AND 125.0 DEGREES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
