| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.036 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.180 INCHES MINIMUM AND 4.220 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.752 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
4.080 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHQN |
FIRST LEG WIDTH |
4.180 INCHES MINIMUM AND 4.220 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.900 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.036 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 304 |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.036 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.900 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FOUR HOLES ON CENTER SECTION, 0.156 IN. DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
OXIDE |
