| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.0897 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.359 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.700 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.0897 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A715 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.280 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.700 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.0897 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ONE PIN LOCATED ON FIRST LEG ONE ADDITIONAL HOLE LOCATED ON CENTER SECTION, 0.150 IN. DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
