| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
4.8592 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.1196 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
6.100 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
1.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.0196 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 NOMINAL INCHES |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
1.150 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
1.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
5.340 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.0596 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.281 NOMINAL INCHES |
| AHPX |
SECOND LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.100 NOMINAL INCHES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
