| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.0860 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
5.7500 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.0600 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.0900 RADIANS NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.5000 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.0000 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.5500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.2900 INCHES MINIMUM AND 0.2930 INCHES MAXIMUM |
| AHQV |
FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
3.0000 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
5.7500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.7500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.0860 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
0.0900 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.3700 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHPX |
SECOND LEG THICKNESS |
0.0860 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
5.7500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
