| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
4.750 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.375 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
8.250 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
2.270 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.785 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.375 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
1.000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.406 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-22698 GR DH36, CL U MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET CENTER SECTION |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.375 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.375 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
