| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
3.2800 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.1900 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.5700 RADIANS NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
1.2400 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.4060 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.7200 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.0000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1900 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.0000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.2500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
RIB STIFFENER CENTER SECTION |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.3750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.0000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.5700 RADIANS NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.2500 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
3.5000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.2210 INCHES MINIMUM AND 0.2580 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1900 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.0000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
