| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
10.7500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.1250 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
15.0000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
60.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.5000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.4370 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.1250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
15.0000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.0000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.5000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.7500 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.3800 RADIANS NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
11.5000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.4370 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.0000 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.1250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
15.0000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
