| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
65.6 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
540.0 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
241.3 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
35.0 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
3 SLOTS |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
241.3 MAJOR INCHES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
23.9 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
540.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
51.0 MILLIMETERS NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
19.1 MILLIMETERS NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
9.5 MAJOR INCHES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
19.1 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
25.4 MAJOR INCHES |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
97.9 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
63.5 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
19.1 MILLIMETERS NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHMA |
SECOND LEG SLOT WIDTH |
9.5 MILLIMETERS NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
540.0 MAJOR INCHES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
