| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
0.1300 RADIANS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
4.0000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.0000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.4420 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
8.0000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
8.0000 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.6000 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.3600 INCHES MINIMUM AND 0.4000 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ABPX |
MATERIAL THICKNESS |
1.0000 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.5580 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.4420 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.0000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
10.1600 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.6000 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.3600 INCHES MINIMUM AND 0.4000 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLF |
SECOND LEG WIDTH |
10.1600 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
TRIANGLE |
