| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.0620 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.2500 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.7500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.09 RADIANS NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHQQ |
FIRST LEG END WIDTH |
8.0200 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.1900 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
8.1000 INCHES MINIMUM AND 8.1200 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.0630 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| CSSR |
SECOND LEG ANGLE |
0.09 RADIANS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.0630 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.1900 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
THERE ARE TWO HOLES WITH A DIA. OF 0.164-32 UNC-2B THEY ARE LOCATED 0.3750 IN. FROM SIDE TO CENTER OF HOLE AND FROM END TO CENTER OF HOLE IS 0.2475 IN. THE TWO HOLES ARE LOCATED 7.6250 IN FROM CENTER OF HOLE TO CENTER OFHOLE |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
