| MRC |
Requirement Statement |
Characteristics |
| CRMK |
ANGLE |
6.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
31.5 MILLIMETERS MINIMUM AND 32.1 MILLIMETERS MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
11.6 MILLIMETERS MINIMUM AND 12.2 MILLIMETERS MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
12.7 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
14.4 MILLIMETERS MINIMUM AND 17.4 MILLIMETERS MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
31.8 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
154.6 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
4 |
| ABPX |
MATERIAL THICKNESS |
0.1350 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| ABTB |
MOUNTING HOLE DIAMETER |
11.6 MILLIMETERS MINIMUM AND 12.2 MILLIMETERS MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
15.9 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
11.2 MILLIMETERS MINIMUM AND 14.2 MILLIMETERS MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
50.5 MAJOR MILS AND 51.1 MAJOR CENTIMETERS |
| ADLL |
SECOND LEG LENGTH |
82.6 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
11.6 MILLIMETERS MINIMUM AND 12.2 MILLIMETERS MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
25.4 MILLIMETERS NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
