| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.200 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.095 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
3.360 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
45.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.150 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
3 SLOTS |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
1.150 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.095 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.360 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.900 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.500 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.490 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
45.0 DEGREES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
0.620 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
2.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.440 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.220 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.700 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.380 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.095 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.360 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
THE SLOTS ON THE SECOND LEG ARE OPEN TO THE END OF THE LEG |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
