| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.1190 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.0000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.1600 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.2030 INCHES MINIMUM AND 0.2090 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.5000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.5000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.0000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.0000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.2150 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.5000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.12 RADIANS NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 RADIANS NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.3750 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.6500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
0.6000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.2650 INCHES MINIMUM AND 0.2760 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.0000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM-B-633 ASSN STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ZINC |
