| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.187 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.240 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
100.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.280 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.406 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.980 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.130 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.187 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.240 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.480 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
3.620 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.480 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.187 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
