| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.050 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.500 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ATTACHED WITH RIVETS REQUIRES CLIP NUT IN CENTER HOLE POSITION INTENDED FOR SUPPORT OF WIRE BUNDLES ONLY. BRACKET SAME AS PART NUMBER 9M672C2L EXCEPT HAS 3 HOLES AND CLIP MOVED TO CENTER HOLE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER AND CHROMATE |
