| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
50.8 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
3.302 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
190.5 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
19.1 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
9.1 MILLIMETERS MINIMUM AND 9.9 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
69.9 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.4 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
3.302 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
190.5 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
50.8 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B-221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
69.9 MILLIMETERS NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
50.8 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHMA |
SECOND LEG SLOT WIDTH |
9.1 MILLIMETERS MINIMUM AND 9.9 MILLIMETERS MAXIMUM |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHLH |
SECOND LEG END WIDTH |
158.7 MILLIMETERS NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
50.8 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
190.5 MILLIMETERS NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
