| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
12.5800 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.7500 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
6.0000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
3.5000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.4370 INCHES MINIMUM AND 0.4440 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.3800 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.3750 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.1300 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| CSSR |
SECOND LEG ANGLE |
90.0 RADIANS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.3750 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
THERE ARE SIX HOLES ON THE BOTTOM OF THE PIECE THAT HAVE SIX INSERTS -MS51831-106 |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
