| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.2800 INCHES MINIMUM AND 2.3400 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.0900 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
14.5900 INCHES MINIMUM AND 14.8300 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
0.22 RADIANS MINIMUM AND 0.28 RADIANS MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.3560 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.2500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.8530 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.6250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.0900 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
9.4600 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.7300 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| CSSR |
SECOND LEG ANGLE |
0.22 RADIANS MINIMUM AND 0.28 RADIANS MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.1900 INCHES MINIMUM AND 1.3100 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.0900 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
7.6500 INCHES MINIMUM AND 7.7700 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171, 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
