| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.0740 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.0000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.6200 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.15 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.3620 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.3120 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.5000 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.0000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.9400 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.0740 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-A-569 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.3750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
5.0000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.15 RADIANS NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.7500 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
2.0000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.6200 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.2200 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.0740 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.0000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-C-490, TY 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC |
