| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.186 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.612 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F18E/F |
| ADPE |
CORNER BEVEL LENGTH |
0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.489 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.985 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.1320 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
9 |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
4 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
7.900 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
COVER ACCESS |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ABGL |
WIDTH |
4.420 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-18264 MIL SPEC 1ST TREATMENT RESPONSE AND HS3197 MFR REF 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT POLYURETHANE AND PRIMER |
