| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
CARRIER, BRIDGE LAUNCHING TANK, ABRAMS M-1 |
| CRMK |
ANGLE |
90.0 DEGREES NOMINAL |
| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
3.250 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
9.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.280 INCHES NOMINAL |
| AHRD |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
3.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.380 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.880 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
6 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC ALL MATERIAL RESPONSES OR ASTM B209 ASSN STD ALL MATERIAL RESPONSES |
| ABPX |
MATERIAL THICKNESS |
0.060 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.280 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
14.380 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.280 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171, 7.2.1 MIL STD ALL TREATMENT RESPONSES |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
