| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
NIMITZ CLASS CVN |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
90.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
6.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.650 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.598 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.425 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.188 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
7.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.380 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.920 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.166 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.707 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.525 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.875 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.439 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.339 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
3 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.188 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SLIDE SCREW TUNER BRACKET |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH -264 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
