| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-432-1526 ARMORED RECONNAISSANCE-AIRBORNE ASSAULT VEHICLE FIGHTING VEHICLE SYSTEM,BRADLEY (BFVS) |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
1.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.860 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.830 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.970 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.630 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 5086 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.690 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.120 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
3.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.500 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.340 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.750 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET,MOUNTING,VEHICLE MOTION SENSOR |
| STYL |
STYLE DESIGNATOR |
ANGLE |
