| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
1240-01-460-6103 INTEGRATED SIGHT AS MISSILE,TOW |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.200 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A-36 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.135 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.190 INCHES NOMINAL |
| CWSC |
SECOND LEG SLOT OFFSET ANGLE |
0.0 DEGREES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.121 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| ADLL |
SECOND LEG LENGTH |
0.770 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET,SPRING |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM |
