| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
CLEVIS AND BUMPER ASSEMBLY |
| AHQB |
CENTER SECTION THICKNESS |
0.875 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.250 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.500 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.531 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.312 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
3.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.169 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.495 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.469 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
5.950 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 316L |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.950 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLEVIS |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
