| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
EXTERNAL COUNTER MEASURE TUBES SEAWOLF CLASS SUBMARINE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.500 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
5.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.545 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.400 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.690 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
13.400 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.670 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-N-281, CL A FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
NICKEL ALLOY 400 |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.745 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
13.400 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
GUIDE PIN |
| FEAT |
SPECIAL FEATURES |
MIDDLE HOLE COUNTERBORED 1.000 IN. X .24 IN DP BOTH SIDES |
| STYL |
STYLE DESIGNATOR |
ANGLE |
