| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F-22 |
| AHPZ |
CENTER SECTION HEIGHT |
1.125 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.550 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.094 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.760 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4 T851 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 T8511 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.094 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
DETAILS-EXTRUSION, HARNESS SUPPORT |
| FEAT |
SPECIAL FEATURES |
NAME SUBMITTED FOR CATALOGING-BRACKET, STRUCTURAL COMPONENT,AIRCRAFT ITEM REQUIRES 1 NUTPLATE P/N LK204F3 2 RIVETS P/N MS20426AD3-6 POSITION NUTPLATE TO MAINTAIN .19 MIN NUTPLATE RIVET EDGE DISTANCE AND TO PREVENT INTERFERENCE AND OVERHANG |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
