| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-436-0005 ARMORED RECONNAISSANCE-AIRBORNE ASSAULT VEHICLE:BRADLEY |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.5000 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.120 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.4000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.5000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.5000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5086 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMST B221,5086-H111 OR H112 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.6250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.2500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.960 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPX |
SECOND LEG THICKNESS |
0.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.5000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
