| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.080 RADIANS NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
4.670 INCHES MINIMUM AND 4.710 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1018 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AST-108-69 ASSN STD ALL MATERIAL RESPONSES |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.470 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
4.670 INCHES MINIMUM AND 4.710 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-22750 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 3RD TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND PRIMER AND PRIMER AND PRIMER EPOXY |
