| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
72.000 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.652 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.344 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
72.000 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS QQ-A-250/12 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.344 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
LEG STYLES BOTH HAVE APPROXIMATELY 0.250 INCH HORIZONTAL SLOTS PLACED AT 1.375 INCHES APART ALONG THE LENGTH OF THE CHANNEL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
