| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
BRADLEY 2350014204716 |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
1.005 INCHES MINIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.870 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
5.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
3.625 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.870 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
5.380 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, DIAGNOSTIC CONNECTOR |
| FEAT |
SPECIAL FEATURES |
KHOLES ON FIRST LEG ARE DIFFERENT SIZES SMALLER ONE IS 1.005-1.015 THRU, CENTERED 0.870 FROM LEFT EDGE AND 1.250 FROM BOTTOM EDGE OTHER HOLE IS 1.759-1.769 THRU, 4.120 FROM LEFT EDGE AND 1.250 FROM BOTTOM EDGE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
