| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
4 SLOTS |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| AHRE |
FIRST LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.780 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.188 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
19.190 INCHES MINIMUM AND 19.310 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.500 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.810 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.311 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-B221-2000 NATIONAL SPEC ALL MATERIAL RESPONSES |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.188 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
19.190 INCHES MINIMUM AND 19.310 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
MRC MDCL REFLECTS A SUPERCESSION OF QQ-A-200 MRC STDC REFLECTS A SUPERCESSION OF MIL-C-22750 EPOXY COLOR FINISH IS LT GREEN |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-PRF-22750 MIL SPEC ALL TREATMENT RESPONSES |
| SFTT |
SURFACE TREATMENT |
PRIMER EPOXY AND PLASTIC EPOXY |
