| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-455-3174 |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.450 INCHES MINIMUM AND 1.850 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
0.13 RADIANS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.560 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.374 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.313 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.940 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.910 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209M FED STD ALL MATERIAL RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.350 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.13 RADIANS NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.275 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
3.690 INCHES MINIMUM AND 3.810 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.195 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
THE SECOND HOLE ON THE FIRST LEG IS ACTUALLY A SLOT MEASURING 0.375 IN (ALONG WIDTH) BY 0.50 IN (ALONG LENGTH) AND CENTERED 0.38 IN FROM EDGE ALONG THE LENGTH FOR THE FINISH, THE COLOR IS 383 GREEN, CHIP NO. 34094 OF FED-STD-595 OMIT PRIME AND PAIT FR |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171 MIL STD 1ST TREATMENT RESPONSE AND FED-STD-595 FED STD 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE AND PRIMER EPOXY AND PLASTIC POLYURETHANE |
