| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-455-3174 |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.450 INCHES MINIMUM AND 1.850 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
0.13 RADIANS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.560 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.374 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.313 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.940 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.910 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209M NATIONAL SPEC ALL MATERIAL RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.350 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.13 RADIANS NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.275 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
3.690 INCHES MINIMUM AND 3.810 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.195 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
THIS ITEM IS THE EXACT OPPOSITE OF P/N 12478972-3 2ND HOLE ON 1ST LEG IS ACTUALLY AA SLOT 0.375 IN (ALONG WIDTH) BY 0.50 IN (ALONG LENGTH) AND CENTERED 0.38 IN FROM EDGE ALONG LENGTH FINISH: COLOR IS 383 GREEN, CHIP NO. 34094 OF FED-STD-595 OMIT PRIM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171 MIL STD 1ST TREATMENT RESPONSE AND FED-STD-595 FED STD 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE AND PRIMER EPOXY AND PLASTIC POLYURETHANE |
