| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
ELECT TEST EQUIP - GPETE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
3.5 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
2.8 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
5.0 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
10.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
10.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.0018 MILLIMETERS NOMINAL |
| MATT |
MATERIAL |
ALUMINUM |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
10.8 MILLIMETERS NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
17.0 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
15.8 MILLIMETERS NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
10.8 MILLIMETERS NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
56.5 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
34.0 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.0018 MILLIMETERS NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
2.8 MILLIMETERS NOMINAL |
| AHLF |
SECOND LEG WIDTH |
92.0 MILLIMETERS NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
REG. BKT. |
| FEAT |
SPECIAL FEATURES |
FIRST LEG REFERS TO 2 10X10 TABS ON EACH END OF BRACKET SECOND LEG'S 4 HOLES ARE C'SK 90 DEGREES X 5.7 SECOND LEG ALSO HAS 3 HOLES 9.25 DIAM (TO FIT M3 PEM), 2 ARE 5.0 FROM EACH SHORT SIDE AND 17.0 FROM LONG EDGE, THIRD HOLE IS 29.0 FROM ANGLE EDGE AND |
| STYL |
STYLE DESIGNATOR |
ANGLE |
