| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
HMMWV 2320-01-413-3739 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWMX |
FIRST LEG CUTOUT LENGTH |
1.310 INCHES NOMINAL |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
3.500 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
3 SLOTS |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.870 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.875 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
7.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.880 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.540 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.290 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.625 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.880 INCHES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
2.880 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
3.500 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
5.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.880 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
7.750 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2 UPSET NUTS, 0.190-32 |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
MTG ANGLE, COVER, DRIVER'S SIDE, FRT |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PRIMER AND PAINT |
