| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
BRADLEY 2350-01-432-1526 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
3.750 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.563 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.750 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.500 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209, ALLOY 5086-H32 OR H116 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.745 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
2.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANNUNCIATOR BRACKET |
| FEAT |
SPECIAL FEATURES |
XLONGER(VERTICAL) LEG HAS THIRD HOLE 1.000 INCH IN DIAMETER, CENTERED 0.745 FROM LEFT EDGE AND 0.745 FROM BEND SHORTER(HORIZONTAL) LEG HAS 1.250 X1.250 INCH CUT OUT WITH CORNER ROUNDED TO RADIUS OF 0.250 ON RIGHT CORNER AT THE BEND |
| STYL |
STYLE DESIGNATOR |
ANGLE |
